Call Us
Find Us

Modern – Efficient – Reliable – Dry Blast or Wet/Dry Blast

Marco USA – Abrasive Blast Equipment

Chesapeake Soda Clean is happy to announce the addition of Marco USA abrasive blast equipment to our premier line-up of surface preparation products. Marco’s commitment to providing superior quality in design, manufacturing, distribution, and service is what sold us. This is professional equipment that will enhance and expand your blast capabilities, and is a perfect fit for use with environmentally friendly recycled crushed glass blast media, which we highly recommend and stock.

We highly recommend the 3.5 HP Series blast pot which is great for all your medium to heavy duty projects and we have access to the entire line of Marco commercial and industrial abrasive blast pots. Please call for more information and pricing.

Marco USA 3.5 Cubic Foot HP-Series Air-Blast Pot

The 3.5 Cubic Foot HP-Series Blast Pot is the right equipment for high production applications where an operator is frequently activating and deactivating the remote control switch during operator repositioning. The pressure-hold remote control system allows the vessel to remain pressurized when the remote control switch is deactivated. This eliminates the time waiting for the vessel to depressurize and pressurize, increasing production rates. This system also reduces abrasive consumption by stopping the abrasive flow in the abrasive metering valve before it enters the air stream, greatly reducing “abrasive chugging” at activation. HP-Series Blast Pots are commonly used in applications such as; blast rooms, blast yards, oil refineries, pipelines, storage tanks, and bridges.

The Maxum III Abrasive Metering Valve is a normally-closed valve for use on a blast pot with a pressure-hold remote control system. The Maxum III Abrasive Metering Valve precisely regulates the flow of very fine to very coarse abrasives. The Maxum III Abrasive Metering Valve comes in two piping sizes; 1-1/4” and 1-1/2”, and two sleeve designs; a Urethane Sleeve for rounded and sub-angular abrasives, or a Tungsten Carbide Sleeve for aggressive angular abrasives. In the non-blasting position, the Maxum III Abrasive Metering Valve remains in the closed position, stopping the flow of abrasive from exiting the blast pot. When the remote control system is activated, an air signal is sent to the Maxum III Abrasive Metering Valve, opening the valve, allowing abrasive to flow from the blast pot. When the remote control system is deactivated, the Maxum III Abrasive Metering Valve closes and stops the flow of abrasive from exiting the blast pot.

KEY FEATURES:

  • Pressure-hold KwikFire 130 Remote Control System
  • 1-1/2″ Maxum III Abrasive Metering Valve with Tungsten Carbide or Urethane Components
  • 90° Conical Bottom
  • Galvanized Pipe Fittings
  • Two Lifting Lugs
  • 16” Semi-Pneumatic Wheels
  • Dry blast, wet blast, slurry blast, dustless blasting capabilities
 
 
 

Marco USA 6.5 Cubic Foot HP-Series Blast Pots

The 6.5 Cubic Foot HP-Series Blast Pot is the right equipment for high production applications where an operator is frequently activating and deactivating the remote control switch during operator repositioning. The pressure-hold remote control system allows the vessel to remain pressurized when the remote control switch is deactivated. This eliminates the time waiting for the vessel to depressurize and pressurize, increasing production rates. This system also reduces abrasive consumption by stopping the abrasive flow in the abrasive metering valve before it enters the air stream, greatly reducing “abrasive chugging” at activation. HP-Series Air-Blast Pots are commonly used in applications such as; blast rooms, blast yards, oil refineries, pipelines, storage tanks, and bridges.

The Maxum III Abrasive Metering Valve is a normally-closed valve for use on a blast pot with a pressure-hold remote control system. The Maxum III Abrasive Metering Valve precisely regulates the flow of very fine to very coarse abrasives. The Maxum III Abrasive Metering Valve comes in two piping sizes; 1-1/4” and 1-1/2”, and two sleeve designs; a Urethane Sleeve for rounded and sub-angular abrasives, or a Tungsten Carbide Sleeve for aggressive angular abrasives. In the non-blasting position, the Maxum III Abrasive Metering Valve remains in the closed position, stopping the flow of abrasive from exiting the blast pot. When the remote control system is activated, an air signal is sent to the Maxum III Abrasive Metering Valve, opening the valve, allowing abrasive to flow from the blast pot. When the remote control system is deactivated, the Maxum III Abrasive Metering Valve closes and stops the flow of abrasive from exiting the blast pot.

KEY FEATURES:

    • Pressure-hold KwikFire 130 Remote Control System
    • 1-1/2″ Maxum III Abrasive Metering Valve with Tungsten Carbide or Urethane Components
    • 90° Conical Bottom
    • Galvanized Pipe Fittings
    • Two Lifting Lugs
    • 16” Semi-Pneumatic Wheels
    • Dry blast, wet blast, slurry blast, dustless blasting capabilities

Crushed Glass Blast Media, Soda Blast Media, Baking Soda Blasting & Sandblasting in Maryland

Chesapeake Soda Clean