soda blasting a boat Older 30' sailboat with tons of bottom paint view larger pic		soda blasting a boat Wipe down hull side with cleaner to remove dirt and/or oxidation view larger pic
	soda blasting a boat Lay out 2 strips of 12' wide 4 mil plastic between keel blocks and stands and extend 10' past bow and stern. Join edges by rolling plastic on itself and clamp. view larger pic		soda blasting a boat Remove stands one at a time and pull plastic under and replace stand. One extra set of stands may be needed for safety. view larger pic
	soda blasting a boat Plug all thru hull openings with paper towel. view larger pic		soda blasting a boat 24' wide ground plastic that extends 10' past bow and stern. view larger pic
	soda blasting a boat Ensure hull is dry for good tape adhesion view larger pic		soda blasting a boat Start hanging 12' wide 4 mil plastic about 2' to 3' above water line and extend ends 10' past bow and stern. Use marine grade light duty shrink tape only. view larger pic
	soda blasting a boat Pleat corners to allow room to blast and move in corners. view larger pic		soda blasting a boat Mate side plastic edges to ground plastic edges by rolling edges and clamping. view larger pic
	soda blasting a boat Completed tent view larger pic		soda blasting a boat Soda blast technician wearing his PPE and ready to do battle. view larger pic
	soda blasting a boat Beginning blast operations. view larger pic		soda blasting a boat Blast operations in full swing featuring a well built, tight tent. Small vent "slits" can be cut into plastic as needed. Use of Natrium Products 300 soda blast media ensures great visibility. view larger pic
	soda blasting a boat Blast done in about 2 hours with 100 lbs of media. Let dust settle and remove sides. Media and paint is laying on ground plastic. view larger pic		soda blasting a boat Split plastic into two sections and then into 4, 6 or 8 sections as needed. Remove stands one at a time and remove plastic, then replace stands. view larger pic
	soda blasting a boat Package all plastic and deposit in dumpster for removal to sanitary landfill.  view larger pic		soda blasting a boat Scrub hull sides and bottom with soap and water and rinse. All done by 2 PM! view larger pic

410-271-2652

212 Najoles Rd. Bldg. D.
Millersville, MD. 21108 - New Location!
Please call for appointments

Soda Blasting by Chesapeake Soda Clean

Distributor of
the Buster Blaster Soda Blasting System
The only Patented, True Soda Blasting System
Designed and Manufactured
by The Soda Works!

All Contents © 2004 - 2007 Chesapeake Soda Clean
All rights reserved.

Site design by
Planet Chicken