NEW at CSC Blast!!!
Blast Cabinets by Blast-It-All
Accessories & Blast Media
Glass Bead, Aluminum Oxide, Crushed Glass
The most popular “Little Blaster” LB 4024-3 is in stock and available for viewing and demo’s in our store.
The LITTLE-BLASTER equipment was designed for the hobbyist or very light production use. The LITTLE-BLASTER is constructed from heavy gauge metal, which is continuously welded. Also incorporated into the line are several products from the BLAST-IT-ALL ® production blasting equipment, proven reliability such as the blast gun. The LITTLE-BLASTER is also designed for a small company to start blasting without a lot of expense.
While, the LITTLE-BLASTER is limited to specifically smaller sizes than production type equipment, but it is considered the highest caliber blaster manufactured today.
LB 4024-3 Model Includes:
Reclaimer: High performance 300 CFM cyclone type reclaimer.
Light Box: Two (2) tube 24″ fluorescent light, for best possible lighting in blast chamber, On-Off control switch for light and reclaimer.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Motor: 1/2 HP, 120 volts, 11 amp, 3450 rpm switch controlled.
Dust Collector: Cotton sateen dust bag collects dust from reclaimer. Zipper in bottom for emptying dust and debris.
Fill Door: To add media to machine and remove debris from debris screen basket inside reclaimer, adjustable air intake on door.
Sump Hose: 4″ flexable duct hose, from machine sump outlet to reclaimer inlet.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Media Hose: 1/2″ media line hose from reclaimer media valve to bottom fitting on blast gun.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Media Blast Gun:
Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow.
1/8″ air jet supplied as standard. 5/32″ – 3/16″ air jets with sized nozzles supplied upon request.
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim Kit
|Suction Gun Air Requirements||Gun#||40 PSI||60 PSI||80 PSI|
|1/4″ Nozzle – 1/8″ Air Jet||#4||12 CFM||17 CFM||21 CFM|
|5/16″ Nozzle – 5/32″ Air Jet||#5||19 CFM||27 CFM||34 CFM|
|3/8″ Nozzle – 3/16″ Air Jet||#6||27 CFM||37 CFM||47 CFM|